NOVAWINCH HEN Series 8,000

$4,550.00

If your job won't wait on an unreliable winch, the Novawinch hydraulic winch is the workhorse you need. Built to satisfy the most demanding commercial or toughest industrial applications. Perfect for recovery & rescue operations, heavy-duty flat-bed trailers, and crane applications the Novawinch HEN Series meets EN14492-1: 2006 and SAE J706 requirements.

Quantity:

Add To Cart

STANDOUT FEATURES

125% - Tested to 125% of rated line pull.
x1.5 – Extra room between tie bars and drum – 1.5 x rope diameter
2X – First layer of wire rope breaking strength is at least 2x of winch rated line pull.
DUAL Drum Holes – two wire rope mounting holes on the drum for secure rope-drum connection.

SPECIFICATION
Model	First layer line pull		First layer line speed		Working pressure diff.		Oil flow supply	Gear ratio	Wire rope dia.		Layer	Wire rope capacity
Model	lbs	kg	fpm	mpm	psi	MPa	l/min	Gear ratio	inch	mm		ft	m
HEN8000	8000	3632	27.9	8.5	2030	14	60	16.9:1	Φ3/8″	Φ9.2	4	114.8’	35

Model	HEN8000
Layer of cable	Rated line pull per layer		Line speed		Wire rope capacity per layer
Layer of cable	lbs	kg	fpm	mpm	ft	m
1	8000	3632	27.9	8.5	24.3’	7.4
2	6748	3061	33.1	10.1	52.2’	15.9
3	5835	2647	38.4	11.7	83’	25.3
4	5140	2332	43.3	13.2	114.8’	35

Model	Weight
Model	lbs	kg
HEN8000	108	49

PNEUMATIC CLUTCH
Air pressure range（bar）	1~8
Ventilation volume（L/min）	1

H-EN Valve Options:

NF-060 P2 Y2 S1-002

WARNING:

1. Do not use a winch for hoisting people or hoisting objects above people.
2. Do not use clutch under load.
3. Do not plumb winch into an oil supply system without a relief valve.

NOTE:

1. Recommended oil flow supply range is 40-90 l/min.
2. Dual balance valves as standard, winch must be used in Independent oil supply system which with relief valve.